Tanker Filling Station Revealed

Here's a wee shot of the back of a beer tanker. This one is filling up with Ossian along the red hose from Wednesday's transfer to tanker from Bigger Bertha, our 120 bbl conditioning vessel, and the 30 bbl FV5. The blue-handled valve controls the back or top pressure in the tank as it slowly releases the pressure built up inside as the beer fills up, with the released pressure (CO2/air) coming out to drain through the buff hose. We usually fill the tanker with about 1/2 bar pressure inside. The small red valve is for taking samples from the tanker. The T-piece on the inlet is to allow the first yeasty part of the beer flow to drain rather than go inside. The stainless steel valve to the right of the blue valve is the on CIP (cleaning in place) line which is connected to sprayheads inside the tanker.

When the tanker is full, fob or foam then beer comes out of the drain hose and it's then time to close all the valves and clean up! Filling a 150bbl tanker takes us about 2 hours, always checking and watching and listening...and looking forward to the finished bottles!

Slàinte, Ken